For years I've known this block design as Racetrack or Snake in the Grass. Boy, that last name does not do it for me. Yuck. Looking through my reference books I couldn't find either name nor could I find the design under any other name.
It's similar to Polka Dot, Drunkard's Path, and Robbing Peter to Pay Paul blocks but the important point is that the "road" must be centered on each side. I wrote about that aspect last year here.
 |
| Racetrack quilt top sewn |
I drafted a six-inch block, then cut plastic templates with seam allowances added. I traced these with Frixion pens, something I don't normally use because the ink can never be removed. But these marks are on the cutting lines so will never be seen and they were certainly easier to cut out.
It's also not a beginner's block although I wonder if paperless paper piecing would make it easier. There are two quarter circles on each block which makes it harder. Take your time pinning and sewing. Be careful while pressing. When squaring the block you must keep the roads centered. In my case that meant the road edges lined up at 2.5 and 4.0" for the 6.5" unfinished block. Doesn't sound hard except those measurements must line up on each side. If you've pulled the block out of shape it may not be useable.
It's also not a beginner's block although I wonder if paperless paper piecing would make it easier. There are two quarter circles on each block which makes it harder. Take your time pinning and sewing. Be careful while pressing. When squaring the block you must keep the roads centered. In my case that meant the road edges lined up at 2.5 and 4.0" for the 6.5" unfinished block. Doesn't sound hard except those measurements must line up on each side. If you've pulled the block out of shape it may not be useable.
 |
| Pinning the Racetrack quilt and choosing thread color |
To make the racetrack more than a single path, I added two four-way intersections...
and two three-way intersections.
Both intersections give the driver multiple ways to move his car along the track loops but to get a closed course with three-way intersections, use an odd number of rows and columns. My even-numbered rows mean the roadway runs off the quilt. I wanted to do that so our Fabulous Guy can extend the raceway with building blocks but other people may not want cars racing off the quilt/mat.
I considered sewing a median line along the road but finally just stitched in the ditch along each side and then went back and meandered on the background areas.
This old Moda stripe as been in the stash for years. I love stripes for binding and think the colors work well here. Plus, I'm trying to use up fabric when I find a good place for it. No more saving it for that "perfect" project. The blues and greens blend with the top while the cream background makes it sit back a bit. After all, the racetrack itself is the star of the show.
This is the first time I regret using Mountain Mist. It always shrinks a bit so this is now the Radiator Springs Speedway. If I'd used Warm and Natural or something that doesn't shrink the racetrack might have been smoother. But cars will never be able to race down it independently. They must be hand-pushed.
The loud back is two fabrics that didn't make it to the front. Fun and bright.
Previous post here. I'm surprised how quickly this one was finished. Perhaps because all the leftovers gave me more time for sewing. It's in the mail and should arrive by Twelfth Night. Who remembers that as the traditional day to exchange gifts?
Yesterday my son called New Year's resolutions a to-do list for the first week of January. Hopefully mine will last a bit longer. Wishing you all a healthy and happy 2018.
Enjoy the day, Ann
 |
| A four-way intersection on the Racetrack quilt |
and two three-way intersections.
 |
| A three-way intersection on the Racetrack quilt |
Both intersections give the driver multiple ways to move his car along the track loops but to get a closed course with three-way intersections, use an odd number of rows and columns. My even-numbered rows mean the roadway runs off the quilt. I wanted to do that so our Fabulous Guy can extend the raceway with building blocks but other people may not want cars racing off the quilt/mat.
I considered sewing a median line along the road but finally just stitched in the ditch along each side and then went back and meandered on the background areas.
 |
| Radiator Springs Racetrack quilt |
This old Moda stripe as been in the stash for years. I love stripes for binding and think the colors work well here. Plus, I'm trying to use up fabric when I find a good place for it. No more saving it for that "perfect" project. The blues and greens blend with the top while the cream background makes it sit back a bit. After all, the racetrack itself is the star of the show.
 |
| Radiator Springs Racetrack quilt detail of binding and carhops |
This is the first time I regret using Mountain Mist. It always shrinks a bit so this is now the Radiator Springs Speedway. If I'd used Warm and Natural or something that doesn't shrink the racetrack might have been smoother. But cars will never be able to race down it independently. They must be hand-pushed.
 |
| Back, binding, quilting on Radiator Springs Racetrack quilt |
The loud back is two fabrics that didn't make it to the front. Fun and bright.
 |
| Back of Radiator Springs Racetrack quilt |
Previous post here. I'm surprised how quickly this one was finished. Perhaps because all the leftovers gave me more time for sewing. It's in the mail and should arrive by Twelfth Night. Who remembers that as the traditional day to exchange gifts?
Quilt Details
Size: 44.5"" x 44.5"
Design: Racetrack or Snake in the Grass
Batting: Mountain Mist Blue Ribbon 100% cotton
Thread: yellow Aurifil cotton Mako 50/2 and YLI nylon monofilament
Quilting: walking foot SID and free-motion meander
Yesterday my son called New Year's resolutions a to-do list for the first week of January. Hopefully mine will last a bit longer. Wishing you all a healthy and happy 2018.
Enjoy the day, Ann